|
|
| |
| ¡¡ |
 HOT MELT TANK
MATERIAL |
|
| ¡¡ |
| HB 5010 |
| |
|
| The HB 5010 is a hot melt tank
system with a gear pump and modern plastic case.
An innovative solution for all situations in which
hand-held adhesive applicators are used. The light
but robust plastic case has a high-grade surface
made from self-coloured materials and a dirt-resistant
finish. |
The HB 5010 has been designed
for use with a gun and 4.5 litre tank, made of coated
aluminium.
It has a high hot melting capacity of 4.5 kg per
hour.
The unit's modular construction with a gear pump
and electrical plug contact improves the case of
maintenance and ensures easy access to components.
The entire series complies with all safety-relevant
tests according to European and US standards.
|
| |
|
ADVANTAGES |
| -
Intuitive user guide with integral time
switch
- Clearly laid-out controls
- Lightweight plastic case
- Connections for 2 heated hoses
- Coated aluminium tank
- Tank capacity 4.5 litres
- High hot melting capacity of 4.5 kg per
hour
- Service-friendly and modular construction
- Maximum convenience for cleaning
- Bead and/or spray application
|
|
| |
|
SPECIFICATIONS |
| Dimensions:
720 x 360 x 360 mm
Weight: 45 kg
Power connection: 220 - 240 V, 50 Hz (alternatively
110-120 V, 60 Hz)
Maximum power requirement: 2900 W
Temperature control: 6-channel electronic
temperature controller, upgradeable to 10
channels
Operating temparature: 135 - 210¡Æ C
Temperature constancy: ¡¾ 0.5¡Æ K
Hose connection ports: 2
Excess-temperature protection: limited by
260 ¡ÆC thermal cut-out
Ambient temperature: 0 - 40¡Æ C
Hot-melting capacity: 4.5 kg per hour
Warm-up time: approximately 30 minutes
Pump system: gear pump and pumping capacity
39 kg per hour
Bypass-valve setting: 35 bar (max. 55 bar)
Usable tank capacity: 4.5 litres
Noise emission: 67 dBA
|
|
| |
| HB 4000 HOT MELT TANK SERIES |
| |
|
When choosing HB 4000 applicators,
the most progressive and economical hot melt systems
are used.
The units were developed to meet the specific requirements
of individual end-user applications.
These tanks are fully flexible, perfectly matched
with your application.
Options for bulk units:
pattern controller, level control, power control
24 V, tachometer for the pump motor and pneumatic
by-pass-regulator. For most systems you can choose
between two pump types:
Gear Pump: This variable speed electric DC pump
allows a constant flow of hot melt to be pumped
for precise adhesives applications.
Piston Pump: The double action pump provides rugged
virtually maintenance free operation.
Hot melt adhesive can be pumped with as low as
0.2 bar (3 psi) air pressure and as high a 6 bar
(90 psi) delivering 72 bar (1080 psi) at the nozzle.
The pump compression ratio is 1:12.
|
| |
|
MODEL
|
HOT
MELT TYPE |
TANK
SIZE |
MELT
RATE |
PUMP
RATE |
PUMP
TYPE |
| HB 4040
|
EVA, PO, TK |
4.5 L |
4 kg per hour |
10.0 g/stroke |
P |
HB 4070 |
PA |
7.0 L |
6 kg |
38.4 kg per hour |
GE |
HB 4100 |
EVA, PO, TK |
9.0 L |
12 kg per hour |
38.4 kg per hour
10.0 g/stroke |
GE
P |
HB 4150 |
PA |
15.0 L |
12 kg per hour |
38.4 kg per hour |
GE |
HB 4200 |
EVA, PO, TK |
18.0 L |
16 kg per hour |
10.0 g/stroke
76.8 kg per hour |
GE
P |
HB 4250 |
EVA, PO, TK, PA |
25.0 L |
20 kg per hour |
76.8 kg per hour |
GE |
HB 4450 |
EVA, PO, TK, PA |
45.0 L |
35 kg per hour |
76.8 kg per hour |
GE |
HB 4650 |
EVA, PO, TK, PA |
65.0 L |
50 kg per hour |
153.6 kg per hour |
GE |
|
(1) EVA=Ethylene Vinyl Acetate,
PA=Polyamide, PO=Polyolefin, TK=Thermoplastiic Rubber
(2) P=Piston, GE=Gear with electric motor |
| |
|
| ¡¡ |
|
